HARLEY DAVIDSON HEEL/TOE SHIFT LEVER KITS INSTALLATION MANUAL
download INSTALLATION NOTE The shift levers in these kits have opposite counterbored screw holes. When the toe and heel levers are positioned correctly, the socket head cap screws will be installed...
View ArticleHARLEY DAVIDSON AIRFOIL RIDER HEEL REST KIT INSTALLATION MANUAL
download 1989 and later FX Softail Models with Original Equipment (OE) Forward Controls, •1990 and later Dyna models (except 2003 and later FXDWG), •Dyna models equipped with Forward Control Kit...
View ArticleHARLEY DAVIDSON DYNA FLOORBOARD KIT INSTALLATION MANUAL
download Installation SHIFTER ASSEMBLY (LEFT SIDE) 1. Remove highway footrest assembly, if equipped. Discard bracket, plate and mounting hardware. 2. Remove stock footrest assembly. 3. Remove stock...
View Articleharley- davidson DYNA BLACK FORWARD CONTROL KIT installation Manual
download 1. Disconnect battery cable, negative (-) cable first. 2. Remove the left side rider footrest assembly. Save the footrest and fasteners for installation. Discard the remaining hardware. 3....
View ArticleHARLEY DAVIDSON SHIFTER SHAFT COVER WITH INSERT INSTALLATION INSTRUCTIONS
download INSTALLATION 1 2 4 3 5 6 7 is01872 1. Shifter shaft 2. Inner cover 3. Toe shifter lever 4. Outer cover 5. Set screw (for outer cover) 6. Set screw (for inner cover) 7. Casting Figure 1....
View ArticleHARLEY DAVIDSON FLAME SHIFTER PEG/ HEEL REST PAD KITS INSTALLATION INSTRUCTIONS
download INSTALLATION NOTE A Service Manual for your motorcycle is available at your Harley-Davidson Dealer. To enhance the flame pattern, orient the pegs as shown in Figure 1. 1. If replacing shifter...
View ArticleHARLEY DAVIDSON ALUMINUM SHIFTER LINKAGE REMOVAL AND INSTALLATION MANUAL
download REMOVAL 1. See Figure 1. Remove stock shifter rod (D). 2. Adjust new shifter rod in kit to match the length of the removed shifter rod by loosening locknuts (3), adjusting the length of the...
View ArticleHARLEY DAVIDSON SKULL SHIFTER PEG/ HEEL REST PAD KITS INSTALLATION INSTRUCTIONS
download Models Shifter Peg Kit, Part Number 34689-04 is designed for installation on all model Harley-Davidson motorcycles. Heel Rest Pad Kit, Part Number 34699-04 is designed for installation on all...
View ArticleHARLEY DAVIDSON HEEL REST KIT INSTALLATION MANUAL
download Models Kit 50227-01 is designed for forward controls and fits: •1989 and later FX Softail Models with Original Equipment (OE) Forward Controls, •1993 through 2002 FXDWG, •Dyna models equipped...
View ArticleTRIUMPH ROCKET III HEEL / TOE SHIFTER INSTALLATION INSTRUCTIONS
download 1. Loosen the 10mm nuts at the ends of the shifter linkage rod (notice one end is a left hand thread). Remove the 10mm nut from the shifter arm & disengage the linkage. Remove the shifter...
View Article
